SHINOBI 7
Big. Bright. Beautiful.
INTRODUCING SHINOBI 7
One Monitor for all
The Shinobi 7 can be used in the brightest environments to monitor signals up to 4Kp60 via HDMI or 2Kp60 via 3G-SDI. An ideal monitor for directors, DPs and focus pullers, and as a program or preview display for video switchers.
THE SHINOBI EXPERIENCE
Ready for the Big Screen
Large-screen TVs and cinema displays show films in glorious detail. Full-frame camera sensors capture more information than ever before – often with extremely narrow depth of field. So there’s never been a better time to upgrade your on-camera monitoring so you can confidently capture video that’s perfect for appreciative audiences. Take visual control over composition, focus, exposure and HDR settings by putting a big screen on your camera.
ATMOS Support Compatible Cameras
KEY FEATURES
Shinobi 7 At A Glance
-
-
-
-
-
-
- Intuitive Control
- Brightness and Best
- Continuous Power
- Up to 4K Monitoring
- Support Z Cam E2
- Future Proofing
-
-
-
-
-
TECH SPECS
SHINOBI 7
Dimensions (W x H x D mm) 198mm x 133mm x 39mm / 7.8″ x 5.2″ x 1.5″
Mounting Points
Top: 1 x 1/4″20 with anti-rotational points
Bottom: 1 x 1/4″20 with anti-rotational points
Ambient Operating Temperature Up to 40 Degrees Celsius
Input Voltage 6.2V to 16.8V
Compatible Batteries 2 x NP-F / L-Series
DC-in Connector Locking DC jack (5.5mm OD & 2.1mm ID)
Fan Control Quiet Fan /Limited Brightness & High Fan/Peak Brightness
Video Input
HDMI 1 x HDMI 2.0
SDI 1 x 3G SDI
Chroma Subsampling YCbCr 4:2:0 & 4:2:2
Bit Depth 8/10-Bit
HDR HDMI Auto Detection
Video Output
HDMI Supported
SDI to HDMI Supported
Audio In/Out
HDMI 2ch 24=Bits, Input Independent
SDI 8ch 24=Bits, Input Independent
Analog Audio Out / Headphone Jack 3.5mm Jack
Resolution and Frame Rates (Record, Monitor & Playback)
4K DCI up to 4Kp60 (HDMI Only)
4K UHD up to UHDp60 (HDMI Only)
2K DCI up to 2Kp60 (SDI Only)
FHD 1920 x 1080 Progressive up to 1080p60 (HDMI & SDI)
1280 x 720p Progressive up to 720p60 (HDMI & SDI)
Supported Media
SD Card Up to 128GB Capacity – Used for Firmware Updates & Installing LUTs
File System FAT & FAT32
